ElectronicsWeb Home Page

Filtered d-Sub Adapters

Fri, 08 Sep 2006 13:54:00 GMT

Corry Micronics releases for production filtered d-Sub connector adapters. Ceramic tubular adapters are used in applications requiring high levels of attenuation or where the interfering signals cover a wide range of frequencies...

Diplexers And Multiplexers

Fri, 29 Sep 2006 18:55:00 GMT

Diplexers are three port devices that are used to combine or split signals that are at different frequencies. A diplexer is designed with two fixed bandpass filters that are connected to a common port. Multiplexers are passive devices used to split or combine signals, usually of different frequencies. Once several frequencies are combined, a single transmission medium is used to send or receive the signals

Directional Couplers

Thu, 28 Sep 2006 12:06:00 GMT

Corry Micronics offers four types of 50 ohm directional couplers with several different styles and connector options. All Corry Micronics directional couplers feature a flat frequency response and great port-to-port isolation while maintaining low insertion losses

90� High Power Hybrids

Thu, 28 Sep 2006 18:43:00 GMT

Corry Micronics 90� high power hybrids cover a frequency range from 870 MHz to 2,200 MHz. A 90� hybrid has two outputs that maintain the same output level but the signals on the two outputs are 90� apart. On our hybrids there is a fourth termination or isolation port that absorbs half of any reflected signals from any mismatch on either output...

Lumped Element Power Dividers/Combiners

Tue, 26 Sep 2006 19:03:00 GMT

Corry Micronics' power dividers and combiners come in several different types and form factors. CMI's standard product line includes 0�, 90� and 180� phase dividers. The power dividers equally divide the signal on to each output line...

Tubular Ceramic Capacitors

Wed, 15 Sep 2010 20:18:30 GMT

For over 30 years, Corry Micronics, Inc. has been manufacturing tubular ceramic capacitors for use in their own filtered products. CMI now sells these same high quality ceramic capacitors direct to companies needing filters in their products. CMI has more than one hundred types and sizes of tubular ceramics already in production.

Power Dividers

Tue, 12 Sep 2006 19:25:00 GMT

Corry Micronics offers three main types of power dividers. These power dividers are the Wilkinson style, N connector communications power dividers, Broadband and Ultra-Broadband, SMA connector style and the reactive type power dividers...

Express Connect Strand-Mounted DOCSIS® To WiFi System

Fri, 12 Sep 2008 03:33:00 GMT

The Express Connect is an environmentally hardened DOCSIS to WiFi unit that can have up to four radio cards installed and is designed for quick installation and set-up. Express Connect supports either DOCSIS 2.0 or Euro-DOCSIS 2.0 interfaces and is plant-powered from 35V to 100VAC.

Filtered Interconnect Solutions

Wed, 06 Aug 2008 04:18:00 GMT

Corry Micronics offers a complete line of SMT or connectorized filtered interconnect solutions. CMI offers a wide range of filtered products ranging from ceramic filtered d-sub miniature connectors to filtered adapters, band pass filters and discreet multi-stage custom component filters.

Spanner-Head Filters

Wed, 06 Aug 2003 19:59:00 GMT

Spanner bushing filters solve those tight center-to-center hole spacing requirements. The spanner bushings are designed without the hex used on the standard bolt-in series. The spanner feedthrus are easily installed using the CMI spanner tool. Spanner bushings can be installed with center-to-center spacing down to .110" or 2.8mm when using the 2*56 threaded size. Spanners are available with capacitance up to 10,000 pF and sizes from 2*56 to 8*32.

Housing Machining, Assembly, And Testing Services

Mon, 31 Aug 2009 14:08:59 GMT

Corry Micronics' turn-key program includes machining and plating the housing, soldering the filters, hermetic seal and life testing services, electrical and mechanical qualification. Corry has developed a unique gold plating and soldering process that outperforms conventional techniques.

Bolt-In Feedthrus

Thu, 03 Aug 2006 19:06:36 GMT

Corry Micronics provides Bolt-In Feedthrus...

Solder-In Filters

Wed, 30 Jul 2003 15:17:00 GMT

Many designers have opted to semi-integrate feedthrus by soldering feedthrus directly into the housings. The solder-in feedthrus are available in a glass forward or reverse seal.

Datasheet: Cobra - EBX Single Board Computer

Mon, 20 Jul 2009 20:45:00 GMT

The RoHS-compliant Cobra belongs to a new class of embedded computers offering higher processing performance with lower power consumption, Intel� Extreme Graphics 2 video, and enhanced ruggedization. Relying on the impressive functionality of the Pentium� M and Ultra-Low Voltage (ULV) Celeron� M processors, the advanced design makes it suitable for a wide range of higher-end applications with demanding speed and graphics requirements. In addition, its PC architecture and small footprint make it an excellent choice for traditional embedded applications.

Datasheet: Cougar - PC/104-Plus Single Board Computer

Mon, 20 Jul 2009 20:42:00 GMT

VersaLogic's new Cougar is a PC/104-Plus single board computer (SBC) targeted at military, homeland security, avionics, and medical applications. The Cougar features an AMD LX 800 processor, fanless extended temperature operation, and high resistance to mechanical and thermal shock while drawing less than five watts of power.

Datasheet: Cheetah - PC/104-Plus Single Board Computer

Mon, 20 Jul 2009 20:32:00 GMT

The RoHS-compliant Cheetah single board computer reaches a new level of sophistication for embedded product technology, integrating very high performance with an expanded feature set on the compact and rugged PC/104-Plus form factor. The advanced design makes it suitable for a wide range of higher-end applications such as telematics, UAVs, and complex communications equipment.

Surface-Mount EMI Filters

Tue, 10 Jul 2007 19:57:00 GMT

The Surface Mount EMI Filter family consists of two sizes and two circuit types. The 8 mm long filter offers capacitance values up to 4000 pF, and the 10 mm long filter offers capacitance values up to 8200 pF.

VCO (Voltage Controlled Oscillator)

Tue, 03 May 2005 14:13:36 GMT

Our line of RF VCO's are ideal for use in modern telecommunications systems. Both wide and narrow frequency oscillation ranges are available, tuned from the VCO's DC Bias pin.

Patch Antennas

Mon, 10 May 2004 14:28:00 GMT

Corry Micronics Patch Antennas are easily mounted and feature high quality factor dielectric constants...

Low-Cost, 900 MHz Cavity Bandpass Filters

Tue, 28 Apr 2009 15:35:00 GMT

Corry Micronics offers custom and off-the-shelf cavity Bandpass filters for 900 MHz Communications Systems. The new line of Bandpass filters are designed to cover the spectrum from 902 to 927. These four cavity filters offer superior rejection with very low insertion loss.

Application Note: Switch Mode Power Supplies And Their Magnetics

Mon, 28 Apr 2008 19:29:00 GMT

In today's day and age the most often used topology for electronic power supplies is that of the Switch Mode Power Supply (SMPS), which is a major user of magnetics. In some applications the "older type" linear supplies are still used, but in the early 70's SMPS came into being spurred by the development of faster switching transistors.

Current-Sense Transformer Application Design Guidelines

Mon, 28 Apr 2008 19:23:00 GMT

The standard for precise current measurement in instrumentation and other high reliability equipment applications has been the current sense transformer. They are accurate, easy to implement, and reliable under harsh environmental and thermal conditions. In electronic systems applications such as switch-mode power supplies, current transformers are generally used for control, circuit-protection, and monitoring features. With the increasing availability of OTS (Off-The-Shelf) current transformers, a simple guideline can greatly help in the selection of proper and cost-effective components for many applications.

White Paper: Measuring Transformer Distributed Capacitance

Mon, 28 Apr 2008 19:18:00 GMT

This article is a general discussion of distributed capacitance, Cd, in transformers with emphasis on measurement. Capacitance in a transformer winding cannot be avoided. The voltage difference between turns, between winding layers, and between windings to core, create these parasitic elements. In general, part of the designers' task is to keep capacitance to a minimum. On rare occasions winding capacitance is increased to reduce ringing in switching transformers.

White Paper: Magnetic Component Alternate Source Strategies

Mon, 28 Apr 2008 18:53:00 GMT

Due to the complexities of circuit design and the highly customizable nature of magnetic components, such as transformers and inductors, they are often overlooked by OEMs when it comes to alternate or second source strategies. Magnetic components can be difficult to specify in the first place, and once a supplier is in place there is often a concern that bringing in a second source could be a time-consuming and expensive process.

A Practical Guide For Establishing An RF Safety Program

Tue, 22 Apr 2008 18:57:00 GMT

Narda Safety Test Solutions created this RF Safety Guide to provide the basic information needed to create an RF safety program. It is not intended to be a complete treatise on the subject, but rather an overview that covers the element of RF safety necessary to begin the implementation of an RF safety program.

Press-In Filters

Thu, 27 Mar 2003 19:44:00 GMT

Corry Micronics releases for production a series of press-in EMI filters. The filters are designed to minimize installation time while delivering the same filtering performance as Micronics' standard bolt-in feedthrus...

Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying

Wed, 26 Mar 2008 14:52:00 GMT

Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying

"Express I" -- Wi-Fi Network Processing Board

Thu, 22 Mar 2007 19:12:00 GMT

Express I has been designed for the most demanding network architectures. Express I operates at 533 MHz and has been manufactured with all industrial rated components. The processing board will cold start from -40�C and will maintain faultless operation thru 85�C. There are many options available to further enhance the overall performance of this processing board

Low-Power Wireless Transceiver

Thu, 22 Mar 2007 18:55:00 GMT

Emergent Electronics recently introduced a new low-power wireless transceiver

Point-To-Point Wi-Fi

Thu, 22 Mar 2007 18:49:00 GMT

Emergent Electronics provides low cost point-to-point or point-to-multi point Wi-Fi...

Outdoor Mesh Router

Thu, 22 Mar 2007 18:42:00 GMT

Emergent Electronics provides an outdoor mesh router featuring an extended temperature range and up to four radio cards

Access Point

Thu, 22 Mar 2007 18:30:00 GMT

Emergent Electronics provides an access point featuring an Intel processor

RF Modules

Thu, 22 Mar 2007 18:19:00 GMT

Emergent Electronics provides RF modules, including a wireless transceiver model

Standard Gain Horn Antennas

Tue, 07 Feb 2012 20:09:00 GMT

Standard gain horn antennas for aerospace, military, wireless communications, and medical applications.

Motorola Radio Asset Management

Sat, 07 Feb 2009 08:33:00 GMT

The Motorola® Radio Asset Management Solution is a commercial off-the-shelf (COTS), web-based solution that centralizes asset-tracking and manages workflow, inventory, and reporting processes involved with maintenance activities.

Datasheet: Vapor Trap

Thu, 05 Feb 2009 05:57:00 GMT

FTS Vapor traps are mechanically refrigerated cold traps that protect expensive vacuum pumps from harmful vapors which can shorten their life. The harmful vapors constitute any condensable gases such as water vapor, which, when allowed into the vacuum pump oil, cause it to break down. This results in decreased lubrication and can eventually cause failure of the pump.

Datasheet: Multi-Cool® Bath

Thu, 05 Feb 2009 05:42:00 GMT

Mechanically Refrigerated Bath by SP Industries, Inc.

Datasheet: Hotpack Undercounter, Freestanding, And SpaceSaver Glassware Washer Accessories

Thu, 25 Feb 2010 04:15:00 GMT

Hotpack Under Counter Glassware Washers are engineered for durable, reliable and energy efficient operation. For laboratories with space restraints pick the Space Saver Double Stack Glassware Washer and put two Under Counter Glassware Washers together in a single vertical tower.

Datasheet: Hotpack Undercounter Glassware Washers

Thu, 25 Feb 2010 04:15:00 GMT

Hotpack Under Counter Glassware Washers are engineered for durable, reliable, and energy efficient operation. For laboratories with space restraints pick the Space Saver Double Stack Glassware Washer and put two Under Counter Glassware Washers together in a single vertical tower.

Case Study: Old Dominion Fine-Tunes Its Pricing Model, Increases Driver Productivity, And Enhances Its Competitive Position With The Help Of Motorola Mobile Computers

Tue, 08 Dec 2009 05:05:00 GMT

In the past, Old Dominion drivers used paper manifests and most of the company's pricing decisions were based on averages. "We decided to create a system to capture real-time information about each freight pick up and delivery. The goal was to feed data into our pricing model for greater accuracy and to provide the track-and-trace functionality that customers were coming to expect from a leading carrier like ours," said Craver. By Barry Craver, Director of Freight Processing Applications, Old Dominion

High Current Bolt-In Filters

Thu, 07 Dec 2006 17:53:00 GMT

The high current filter family from Corry Micronices consists of three standard current types: 50 ampere, 150 ampere, and 200 ampere. The standard product line filters are rated with a working voltage of 200 volts DC, 140 volts AC, and have a capacitance of 0.22 µF.

WESCO International, Inc. Announces The Acquisition Of RS Electronics

Thu, 15 Dec 2011 09:17:00 GMT

WESCO International, Inc. (NYSE: WCC), a leading provider of electrical, industrial, and communications MRO and OEM products, construction materials, and advanced supply chain management and logistics services, announced today that a subsidiary of WESCO Distribution, Inc. has entered into a definitive agreement to acquire RS Electronics headquartered in Livonia, Michigan

Vishay Intertechnology Increases Minimum Capacitance Of VJ HVArc Guard® Surface-Mount X7R MLCCs Up To 470 pF

Thu, 15 Dec 2011 09:00:00 GMT

Vishay Intertechnology, Inc. (NYSE: VSH) today announced that it has increased the minimum capacitance values for its VJ HVArc Guard® surface-mount X7R multilayer ceramic chip capacitors (MLCCs)

UCLA Researchers Demonstrate Fully Printed Carbon Nanotube Transistor Circuits For Displays

Thu, 15 Dec 2011 08:38:00 GMT

Since the invention of liquid crystal displays in the mid-1960s, display electronics have undergone rapid transformation

Dongbu HiTek Launches Foundry Industry's First 700V BCDMOS Processing Portfolio At 0.35um node

Tue, 13 Dec 2011 17:00:00 GMT

Dongbu HiTek recently launched the foundry industry's first 700V BCDMOS processing portfolio at the 0.35um node

Wireless & High Frequency Bandpass Filters

Thu, 11 Dec 2003 14:08:00 GMT

The wireless and high frequency filter group is made up of four types of filters. They are Cavity, RF, Monoblock, and LC types.

Tutorial: Switch Mode Power Supplies And Their Magnetics

Mon, 06 Oct 2008 04:54:00 GMT

Many factors must be considered by designers when choosing the magnetic components required in today's electronic power supplies. By Datatronic

White Paper: Transformer Design For Charging Defibrillator Capacitors

Mon, 06 Oct 2008 04:41:00 GMT

Generating high voltage by means of flyback topology is a common approach. Using the generated voltage to charge a capacitor for a high energy pulse are used in defibrillators, photoflashs, strobes and ignition circuits to name a few. The procedure outlined in this article is useful in the initial transformer design phase for charging a capacitor in a stated time. By Datatronic

Temperature Specmanship And Selecting Power Inductors

Mon, 06 Oct 2008 05:14:00 GMT

How many datasheets have we, as engineers, reviewed and all of the data we need is there? Well, if your experiences are like mine, very few times if at all. And to compound the problem the data listed that pertains to your project was measured at a temperature not where you are planning to run your board. By Datatronic

Filtered D-Sub Connectors

Wed, 23 Oct 2002 20:21:00 GMT

Filtered connectors are available in pin counts from 9 to 50 pin...

Filtered Terminal Blocks

Wed, 23 Oct 2002 20:17:00 GMT

Corry Micronics offers a full line of standard and custom barrier style filtered terminal blocks. Micronic's F-36 (#6 screw size) and F-38 (#8 screw size) terminal blocks are rated to 30 and 35 amps respectively, and have become the industry standard for many telecommunications companies.

Filter Plates

Wed, 23 Oct 2002 20:15:00 GMT

Corry Micronics offers filter plate arrays with .100" and 2mm centers

Eyelet-Style Filters

Wed, 23 Oct 2002 19:56:00 GMT

Filter Pins come in a range of values up to 5,000pF in .090 diameter and are available in "C" and "Pi" configurations...

Glass-to-Metal Feedthrus

Wed, 23 Oct 2002 19:52:00 GMT

Corry Micronics offers DC and 50-ohm glass sealed feedthrus. These feedthrus are available in standard and customized packages...

Hermetic Filters

Wed, 23 Oct 2002 19:49:00 GMT

Corry Micronics offers industry-standard broadband hermetic filters in the 1/4-28 thread with a .383 body and the 5/16-24 thread with a .702 body. Both packages are available in C, LB, LT, Pi, and T configurations.

Bolt-In RFI Filters

Wed, 23 Oct 2002 19:27:00 GMT

These resin sealed filters are manufactured for installation into a threaded or thru-hole application. Filters are available in "C", "L" and "Pi" configurations and are available in various capacitances, voltages and sizes ranging from 2-56 to 1/4-28...

Electro-Mechanical Assembly

Wed, 23 Oct 2002 18:40:00 GMT

Corry Micronics offers a wide variety of electro-mechanical assembly services, including...

EMI and RFI Design Consulting

Wed, 23 Oct 2002 18:37:00 GMT

Corry Micronics' skilled Design Engineers, with many years of industry experience, are available for consultation whenever you experience any EMI / RFI issues...

Corry Micronics: Feedthru Filters, Capacitors and Filter Plates

Tue, 22 Oct 2002 19:36:00 GMT

Corry Micronics, located in northwestern Pennsylvania, has been producing Feedthru Capacitors and Radio-Frequency Interference (RFI) Filters since 1970...

Multi-Line Filters

Fri, 17 Oct 2008 15:13:00 GMT

Often times the filtering solution needs to filter multiple data and power lines within the same mechanical package. Filter plates and filtered connectors are a cost effective and time proven method at reducing emissions.

Waveguide Components

Thu, 12 Oct 2006 15:08:00 GMT

Corry Micronics offers a line of waveguide components ranging from the rectangular to the standard gain horn antenna adapters, to the waveguide isolators and circulators to the waveguide directional couplers...

Cavity Filters

Thu, 12 Oct 2006 14:35:00 GMT

Corry Micronics offers a line of cavity filters. We have several stock cavity filters that are designed for specific industries. Some of the more popular stock units are for filtering CDMA repeaters with a Bandpass range of 825 to 835 MHz and other units designed to Bandpass a range of frequencies from 870 MHz to 880 MHz...

RF Switches

Tue, 10 Oct 2006 19:55:00 GMT

Corry Micronics offers a complete line of RF switches. The RF switches are controlled by pin diodes that cover a frequency range of 20MHz to 18GHz. The switches are offered as either the reflective or non-reflective style of RF switch. Many of our RF switches have been installed in communications systems, test equipment, filter selectors and antenna selectors...

Attenuators

Tue, 10 Oct 2006 19:28:00 GMT

Corry Micronics offers a line of 4 bit through 6 bit RF digital attenuators. The digital attenuators are designed using switched bit pin diodes. The attenuators require +/-5volt power supply and feature TTL compatible control logic. Corry Micronics also offers a high REL option that includes screen to the MIL-STD-883...

CAP-XX Supercapacitors Achieve UL 810A Safety Standard

Mon, 09 Jan 2012 11:27:00 GMT

CAP-XX Limited (LSE: CPX), developer of thin, prismatic supercapacitors which deliver burst and back-up power in space-constrained electronic devices, today announced that its supercapacitor energy-storage devices have passed the Underwriters Laboratory (UL) 810A Safety Standard for Electrochemical Capacitors

Murata Expands North American Distribution Agreement With Future Electronics

Thu, 05 Jan 2012 09:22:00 GMT

Murata Electronics North America recently announced that it has expanded its distribution agreement with Future Electronics, Inc. to include the company's power solutions offerings

Design Notes: Filtered Military Circular Connectors

Thu, 31 Jan 2008 21:49:00 GMT

Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including "C", "C2", "L", "J", and "Pi" circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection. Capacitance values are offered from 47 pF to 10�F depending on circuit type and connector style. These filtered connectors cover a broad band of frequencies, and can be effective up to 20 GHz

Fluke Corporation Acquires Martel Electronics Corporation

Tue, 03 Jan 2012 11:43:00 GMT

Fluke Corporation, the global leader in portable electronic test and measurement technology, announces its acquisition of Martel Electronics Corporation, a Derry, N.H.-based manufacturer of electronic test tools and OEM products

WESCO International, Inc. Completes Acquisition Of RS Electronics

Tue, 03 Jan 2012 11:15:00 GMT

WESCO International, Inc. (NYSE: WCC), a leading provider of electrical, industrial, and communications MRO and OEM products, construction materials, and advanced supply chain management and logistics services, today announced that a subsidiary of WESCO Distribution, Inc., has completed the previously announced acquisition of RS Electronics

Bilayer Graphene Works As An Insulator

Wed, 25 Jan 2012 13:19:00 GMT

Research by UC Riverside-led team has potential applications in digital and infrared technologies

Researchers Devise New Means For Creating Elastic Conductors

Wed, 25 Jan 2012 13:14:00 GMT

Researchers from North Carolina State University have developed a new method for creating elastic conductors made of carbon nanotubes, which will contribute to large-scale production of the material for use in a new generation of elastic electronic devices.

Intense Announces 30W 808nm Laser Pump Modules; Compact, High Brightness, High Power Lasers For Defense, Medical, & Industrial Applications

Thu, 26 Jan 2012 03:56:00 GMT

Intense Inc., developer of next generation semiconductor lasers, systems and solutions, recently announced at Photonics West the release of a high power 30W version of the Series 8000 808nm High Power Laser Pump Modules.

New MK52 Negative-Stiffness Optical Vibration Isolation Table

Mon, 23 Jan 2012 05:21:00 GMT

Minus K Technology, a leading manufacturer of vibration isolation products has partnered with Kinetic Systems, Inc. in designing a new, versatile, ultra-low natural frequency optical table isolation system.

VPG's High-Temperature Bulk Metal® Foil Resistors Win Best Electronic Design Award From Electronic Design Magazine

Fri, 20 Jan 2012 10:35:00 GMT

Vishay Precision Group, Inc. (NYSE: VPG) today announced that its HTH(G) high-temperature Bulk Metal® Foil resistors have been honored with a Best Electronic Design award from Electronic Design magazine

Leading Electronics Industry Association To Sponsor GlobalSpec's Electronic Components & Product Design Online Trade Show And Event

Wed, 18 Jan 2012 19:54:00 GMT

The Electronic Components & Product Design online trade show and event to be hosted by GlobalSpec on April 25, 2012 will be sponsored by the Electronic Components Industry Association (ECIA), a leading trade association dedicated to supporting the expanding needs and interests of the authorized electronics supply chain

Renesas Electronics Introduces New V850E2P Microcontroller Series With Built-In Resolver Sensor Interface

Wed, 18 Jan 2012 18:53:00 GMT

Renesas Electronics Corporation, a premier provider of advanced semiconductor solutions, recently announced that it has developed a new 32-bit microcontroller (MCU), the V850E2/PJ4-E, which incorporates an on-chip resolver sensor interface

Methode Electronics Power Solutions Group To Exhibit At Applied Power Electronics Conference February 5 To 9

Tue, 17 Jan 2012 11:43:00 GMT

Methode Electronics Power Solutions Group, a division of Methode Electronics, Inc. (NYSE: MEI), today announced it will exhibit at the upcoming Applied Power Electronics Conference (APEC) held February 5 to 9, 2012, in Orlando, Florida

Triad Selects Berkeley Design Automation Analog FastSPICE Platform For Verification Of Configurable Mixed-Signal ASICs

Tue, 17 Jan 2012 16:30:00 GMT

Berkeley Design Automation, Inc., provider of the world's fastest nanometer circuit verification, recently announced that Triad Semiconductor Inc., the industry's leading supplier of configurable mixed-signal ASICs, has selected the company's Analog FastSPICE (AFS) Platform for block-level characterization and full-circuit verification of their analog and mixed-signal designs

Leading OEM Selects Trident For New Cinemascope, Internet Connected 3DTV For US Market

Tue, 17 Jan 2012 04:26:00 GMT

Trident Microsystems, Inc. (Nasdaq:TRID), a leading provider of TV and Set-Top Box semiconductor solutions, announced that its 3D Cinemascope technology and a complete suite of connected solutions offered in TV550 system-on-a-chip (SoC) and PNX5120/30 frame rate converter (FRC) have been designed into a leading OEM's new 58-inch 3D Cinemascope TVs scheduled to ship in the first quarter of 2012

SentryBay And NetSTAR Sign Strategic Technology Partnership

Fri, 13 Jan 2012 04:16:00 GMT

Security specialist SentryBay has announced that it has signed a new technology partnership deal with NetSTAR, a global leader in OEM secure Web filtering

Monsoon Multimedia And Zenverge Partner To Deliver Placeshifting And DVR Functionality To Leading Consumer Electronic OEMs

Tue, 10 Jan 2012 10:57:00 GMT

Monsoon Multimedia, a leading provider of video convergence products, today announced it has selected Zenverge's ZN200 Quad-Stream Transcoder and developed a partnership with Zenverge to leverage Monsoon's placeshifting and DVR software for high-definition (HD) streaming to multiple mobile devices for major original equipment manufacturers (OEMs)