FTS Systems/SP Scientific thermal equipment group offers low temperature cooling equipment for any thermal management requirement. Systems are available with contact, fluid or air cooling mediums with a wide variety of temperature ranges and heat load capacities.
Eliminate costly and awkward expendable refrigerants such as dry ice and liquid nitrogen. Let FTS Systems/SP Scientific assist you in the integration of mechanically refrigerated cooling products into your equipment or process.
Equipment designed to service the aerospace, semiconductor, tissue freezing, charpy, automobile testing, and medical device industries -- to name a few.
Maxi Cool Recirculating Chiller
The Maxi Cool Recirculating Chillers have a standard temperature range of -15 to +35C. The low temperature option increases the low end of the range to -38C and the high temperature option raises the high end of the range to +75C. The Maxi Cools have up to 1.5 ton of refrigeration capacity. Centrifugal pumps are standard and positive displacement pumps are optional to meet most cooling requirements.
The small foot print and rugged design are focused on providing users with continuous operation of these chillers.
Ultra Cool Recirculating Chillers
The Ultra Cool Recirculating Chillers have a temperature range of -40 to +130C (range varies by model) and a cooling capacity of up to 24000 watts (81910 BTU/hr). Systems are available with centrifugal or turbine type pumps.
The rugged design is focused on providing users with 24 x 7 continual operations of these chillers.
RS Recirculating Chiller
The RS Series of recirculating chillers includes the RS33, RS33 low temperature, RS44 and RS44 low temperature systems. These are bench top recirculating chillers with a maximum low of -10C
(-40C for low temperature systems) and a maximum high of
+35C (+75C high temperature option on RS33).
Ultra Low Temperature Recirculating Chillers
The Ultra Low Temp Recirculating Chillers have are available in 4 different configurations with a variety of temperature ranges starting at -90C and going up to +150C depending on options selected. The Ultra Low Temps have up to 11,590 but/hour heat removal capacity. A centrifugal 4 gpm pump is standard.
The small foot print and rugged design are focused on providing users with 24 x 7 continual operation of these chillers.
SOURCE: ATS Life Sciences Scientific Products